Evalu8Pro
Sign in Get started

Know every well is flowing, wherever it is.

We fit sensors at the wellhead, connect them by satellite where there is no mobile signal, and Evalu8 Pro watches every reading. You see which wells are working right now, which are starting to drift, and what to send a team to fix, before your crops, your line or your customers go without water.

Plan a pilot See how it works

For farms, bottlers, utilities, estates and every business that depends on a well. Hardware, connection and software from one team. Are you a water charity? Artesian Well Project is for you.

Example figures. Every well on one screen: flowing, drifting or gone quiet, with the likely reason. Readings arrive by satellite or mobile network.

Most broken wells are found by someone walking to them

  • Failures stay hidden for weeks

    Without readings, a well that stops flowing is only discovered at the next visit or the next complaint. Until then, irrigation stops, lines wait and tanks run down.

  • Visits are expensive, and often wasted

    Remote sites mean long journeys to check wells that turn out to be fine, and repair teams who arrive without knowing what is wrong or which parts to bring.

  • Regulators and auditors want proof

    Licences ask how much you took, from which well and when. A meter read by hand and a spreadsheet updated after each visit can only estimate it.

  • Artesian pressure is not forever

    An artesian well flows because the water underground is under pressure. Leaks, uncontrolled flow and over-use bleed it away slowly, and nobody notices until the flow stops.

Evalu8 Pro gives every well a voice. It reports in, speaks up when something changes, and keeps the record that proves the water flowed.

One team, from the wellhead to the decision

Most monitoring projects stall between the parts: a sensor from one supplier, a modem from another, a dashboard nobody opens. We deliver the whole chain, and all of it lands in one model of your sites.

  1. We fit it

    Sensors at the wellhead

    Flow first, then pressure and water quality where they matter, plus the logger’s own battery. Rugged, low-power kit, built to be left alone for a long time.

    Flow · pressure · conductivity · battery

  2. We connect it

    A link from anywhere

    Satellite where there is no mobile signal, mobile network where there is. If the link drops, the logger keeps its readings and sends them later, and they slot into place.

    Satellite · mobile · your own loggers

  3. Evalu8 Pro

    Every reading, watched

    Each well is checked as its readings arrive. A well that goes quiet or reads out of range raises an alert by itself, and the alert clears when it recovers.

    Alerts · live charts · litres delivered

  4. Evalu8 Pro

    Answers, not just alarms

    When a well changes, Evalu8 Pro weighs the evidence and suggests why, for a person to confirm. Every answer is kept, and its rules get sharper from them, with your team’s approval.

    Likely causes · follow-ups · predictions

Already have loggers or a telemetry provider? Any logger or gateway that can send its readings over the internet can post them straight to Evalu8 Pro, and a provider with an API can be connected directly.

Every well, every reading, and what to do about it

Problems spotted days before the water stops

A blocked pipe, a leak or slowly falling pressure shows up in the readings long before a well runs dry. Evalu8 Pro watches the trend, not just the limit, and when a well starts to drift it weighs the evidence across its sensors and its neighbours and names the likely cause.

Your team confirms or corrects it in one click, and each answer is kept with the readings behind it. Evalu8 Pro studies those answers against what you are aiming for, tests changes to its rules against them, and proposes the ones that would have got more of them right, for your team to apply. Your history is also the training data for predicting which wells need a visit next.

Well W-114Flow, last 30 days

Flow at the wellhead, litres a minute

Likely causeBlocked outlet or pipe

  • Flow down 18% in 7 days
  • Wellhead pressure up 9%: water is backing up
  • Neighbouring wells unchanged, so the source is fine

ConfirmCorrect it

Did the repair work? You will know.

After a repair, set a watch: is flow back above 40 litres a minute within 48 hours? Evalu8 Pro checks each reading as it arrives and marks the watch met the moment it is, or missed if time runs out. Nobody has to remember to look again.

Anyone on the team can set one from a well’s page, or simply ask: “check W-207’s pressure is back above 2 bar by this time tomorrow.”

Watcheson Monitoring

  • W-052 · Flow back above 40 L/minSet by Amina after the repair · within 48 hoursMet after 6 h
  • W-207 · Pressure back above 2 barSet by Grace, through Ask · within 24 hours18 h left
  • W-188 · Flow above 25 L/minSet by Daniel · within 72 hoursMissed

Water taken, against every licence

Flow readings add up to the volume taken from each well, site and licence, for any period. Set your licence as a target and Evalu8 Pro raises an alert as you approach it, so you can plan before you are over it.

Returns and audits come from readings rather than estimates, with every figure traceable to the wells behind it. Send the totals to your farm software, ERP or reporting tools through the API.

North farm6 wells, licence view

182,600 m³taken this year, of 250,000 m³ licensed · 73%
0 m³250,000 m³

Alert at 90% of the licence: 225,000 m³

Water taken each month, m³; this month so far

Act from anywhere, with a person in charge

Where a well has a remote valve or pump controller, its controls appear as buttons on its page: close down an uncontrolled flow, or cut back to stay inside a licence. Each press asks for confirmation, is logged with who pressed it, and only counts as done when the well’s own readings show the change.

The equipment keeps its own safety limits, and the well carries on as it is if the connection drops. Evalu8 Pro asks; it never takes over.

Well W-031Valve controller

Set the valveWas fully open · flow 38 L/min
Set valve…
  1. Asked for: valve to 40%[email protected] · 09:14 · confirmed in the dialog
  2. Sent to the controller09:14 · the controller replied “accepted”
  3. Confirmed by the readings09:52 · flow 22 L/min, under the 25 expected

For every business whose work depends on a well

Businesses and public operators

Protect the source your business runs on.

  • Farms and irrigation, bottled water, utilities, estates and resorts, fish farms and mines
  • Water taken, added up against your licence, with an alert before you reach it
  • Pressure and water quality trends that show the health of the source over years
  • Leaks and uncontrolled flow found in hours, not at the next inspection
  • Readings, totals and records into your own systems through the API
Book a demo

Are you a water charity or NGO?

Artesian Well Project is our programme for you.

  • The same sensor units, satellite link and platform
  • Shaped around communities, local partners and repair teams
  • Litres delivered and uptime for every well, project and funder
  • Proof of impact for donors, boards and corporate partners’ CSR reports
Visit Artesian Well Project

Your sites, described once

Behind every screen is one description of how your water works: the sites and the wells on them, the sensors on each well, the licences they draw against, the work orders and the contractors who carry them out. We write it with you, in your own words, and Evalu8 Pro builds the screens, numbers, alerts and API from it.

Add a new kind of sensor, a new site or a new licence, and it is a change to the description, not a software project. Move a sensor from one well to another and the history stays with the well it was on.

  • site
  • well
  • sensor
  • placement
  • licence
  • work order
  • water test
  • contractor

In the model, in plain English

A well is a borehole that flows under its own pressure.

Each one is known by its code, sits on a site and draws against a licence.

Its sensors report flow in litres a minute, pressure in bar and conductivity.

Raise an alert if a well goes quiet for 12 hours, or flow falls below 20 litres a minute.

Add up flow into water taken, by well, site and licence.

  • A page for every welllive charts, alerts, repairs and controls
  • Monitoringwhat is quiet, out of range or drifting, and why
  • Numbers for any groupingwater taken, uptime and repair times, with targets
  • An APIfor your farm software, ERP or control room

Start with a handful of wells. Grow to thousands.

A pilot proves the kit, the connection and the alerts on your own wells, with your own team, before you commit to more.

  1. Survey

    We look at your wells, your sites and what you need to report, and agree what to measure where.

    Sites · wells · reporting

  2. Fit and connect

    We fit the kit at the wellhead and bring it online by satellite or mobile network, or connect the loggers you already have.

    Sensors · logger · link

  3. Describe and watch

    We describe your sites in the model and set the alert limits with your engineers. Your team sees every well from day one.

    Model · limits · dashboard

  4. Learn and predict

    Every answer your team gives is used to test sharper rules, which you approve. In time, your own history predicts which wells need a visit next.

    Causes · watches · predictions

Questions

Do the wells need mobile coverage?
No. Where there is no mobile signal, the kit reports by satellite. Where there is, the mobile network is cheaper, and one account can use both.
What happens when the connection drops?
The logger keeps its readings and sends them when the link is back, and Evalu8 Pro puts late readings in their proper place. If a well stays quiet for longer than you allow, it raises an alert.
We already have loggers. Can we keep them?
Yes. Any logger or gateway that can send readings over the internet can post them to Evalu8 Pro, and a telemetry provider with an API can be connected directly.
Is it only for artesian wells?
No. Artesian wells are where pressure matters most, but the same platform watches pumped boreholes, springs, tanks and piped schemes. The sensors change; the platform does not.
Is AI deciding what is wrong with a well?
No. Suggestions come from rules that weigh the evidence in the readings, with the reasons shown, and a person on your team confirms or corrects every one. AI studies those answers and proposes changes to the rules, tested against your history, and your team decides whether to apply them. Ask, the built-in assistant, answers questions about your wells and names its sources.
Can it control the well?
Only where there is a controller to ask, and only when someone allowed to presses the button. The controller keeps its own safety limits, every press is logged, and it only counts as done when the readings show it.
Who owns the data?
You do. Download the whole model at any time, and read every well, reading and repair through the API.
We are a water charity. Is this for us?
Yes, through Artesian Well Project, our programme for water charities and NGOs. It runs on the same units, satellite link and platform, shaped around communities, partners and funders.

Every well, watched.

Tell us about your wells: where they are, how many, and what you need to know about them. We will show you how a pilot would work.

Plan a pilot See other solutions